*Mills for 320-500mm diameters are not included in the standard equipment of the machine
Log lathe - automatic OCS-4AM
OCS-4AM - This fully automated log Lathe-type program-controlled, which allows to perform operations cylindering logs, milling installation and expansion joint without operatora- vsego pressing a button (also possible to perform all operations in the manual mode).
The main advantages over other machines:
1. This model log lathe enables operation cylindering logs, milling installation and expansion joint for product diameters from 160 to 500mm, with a maximum diameter of the workpiece can be up to 700mm.
2. A distinctive feature of the machine consists in that two immediately performed cylindering mills (roughing and finishing), wherein the amount of hardwood pickup can be smoothly adjusted for both roughing and finishing mills. This arrangement allows for maximum performance, and also provides the ability to easily remove up to 200 mm in the radius of rotation of the log.
3. log lathe OCS-4AM has a fully automatic control of all drives, allowing to perform all processing operations without operator logs in the machine control unit have been integrated digital pressure indicators main drives and adaptive feed speed adjustment and rotation of the log carriage.
4. Used 3-position backrest, which prevents vibrations and disturbances geometry logs for all machining operations.
5. The maximum thickness of the shear layer in a single pass drevesiny- 200mm radius, tsilindrovanie logs in a single pass in the finishing size, during the return and compensation is chosen mounting groove.
6. Thanks to the swing frame drive cylindering, made prompt replacement of the cutting tool.
7. For convenience, the movement of the tailstock made chain drive
8. Availability of contactless inductive position sensors can operate in a wide ambient temperature range.
9. It ensures the quality of treatment at the level of planed wood.
10. Hydraulic lifts Otsilindrovochnye machines allow you to easily and accurately set the log between the front and rear pastern.
11. Remote control of the machine is equipped with a heating system of the electronic part that allows you to operate at low ambient temperatures.
12. Although management software, otsilindrovochny machine does not require special care and highly qualified personnel, the microprocessor itself determines the wrong actions of the operator and an error signal is thus prevented emergencies.
Video of the Log lathe OCS-4AM: